- TANKTECH High Velocity Pressure/Vacuum Valve
- TANKTECH -High Velocity Pressure/Vacuum Valve
U-ISO-H/V/G series high velocity pressure/vacuum valve is designed to prevent the flame passage into cargo tanks and to relieve excessive over pressure or under vacuum of cargo tanks during cargo loading, discharging, ballasting and thermal variation. U-ISO-H/V/G series of high velocity pressure/vacuum valve, which provide Non-hammering, Non-accumulation condensate vapor and Non-corrosion for marine cargo tanks, are very simple and advanced models. U-ISO-H/V/G series is designed to prevent the flame passage into cargo tank in compliance with IMO MSC/Circ. 677/1009, ISO 15364 and vapor control system of USCG ( 46 CFR.39-20.11 & 162.017 )
Basic Rule Requirements
IMO MSC/Circ.1009 International Standard 15364 ...
[Details]
- TANKTECH Tank Cleaning Machine
- TANKTECH -Tank Cleaning Machine
CLEANMAX UPM series is a Tank Cleaning Machines which can be completely programmable machine with single nozzle and can be installed on the tank top or deck. It is suitable for cleaning cargo and slop tanks for Crude oil and Product/Chemical tankers as well as Bulk carriers
[Details]
- TANKTECH Emergency towing arrangement
- TANKTECH- Emergency towing arrangement
An emergency towing arrangement shall be fitted at both ends onboard all tankers of not less than 20,000 tones deadweight as defined in regulation 1/3.21 constructed on or after 1 January 1996.
Benefits
- Saving deck area for installation - Saving Man-hour for installation - Reduction of reinforce structure for under deck - Easy Arrangement for AFT. mooring system
[Details]
- TANKTECH Anti Heeling System
- TANKTECH- Anti Heeling System
Anti heeling system is designed to automatically balance the vessel in upright position by pumping ballast water of ballast tank during loading and unloading. The main components of system are main control panel including inclinometer, pump starter panel, reversible propeller pump and pneumatic actuator valve.
[Details]
- ATLAS COPCO marine air compressor Piston type and screw type
- ATLAS COPCO- marine air compressor Piston type and screw type
Atlas Copco is an industrial group with world-leading positions in compressors, expanders and air treatment systems, construction and mining equipment, power tools and assembly systems. With innovative products and services, Atlas Copco delivers solutions for sustainable productivity. The company was founded in 1873, is based in Stockholm, Sweden, and has a global reach spanning more than 170 countries. In 2010, Atlas Copco had about 33 000 employees and revenues of BSEK 70 (BEUR 7.3).
[Details]
- KANGRIM Boiler
- KANGRIM -Boiler
Kangrim is known world-wide manufacturer for steam boiler and thermal oil boiler. We have a series of boiler to meet each client’s requirements.
[Details]
- KANGRIM Incinerator
- KANGRIM -Incinerator
Kangrim incinerators are the ultimate solution for waste treatment onboard vessels and offshore units. Our vast range of models and versions covers capacities from 320,000kcal/h to 1,290,000kcal/h. On board incineration with local management of sludge oil and solid waste is highly appreciated and recommended by the International Marine Organization (IMO) and all the class societies.
[Details]
- KANGRIM Inert Gas Generators
- KANGRIM -Inert Gas Generators
Kangrim Inert Gas Generators are generally used on Chemical/Product Oil carriers and LNG/LPG carriers, where a higher quality of inert gas is required. A typical Inert Gas Generator system includes six major component parts, they’re burner, deck water seal, P/V breaker, blower, control panel and topping-up generator.
[Details]
|
