TANKTECH -High Velocity Pressure/Vacuum Valve
U-ISO-H/V/G series high velocity pressure/vacuum valve is designed to prevent the flame passage into cargo tanks and to relieve excessive over pressure or under vacuum of cargo tanks during cargo loading, discharging, ballasting and thermal variation. U-ISO-H/V/G series of high velocity pressure/vacuum valve, which provide Non-hammering, Non-accumulation condensate vapor and Non-corrosion for marine cargo tanks, are very simple and advanced models. U-ISO-H/V/G series is designed to prevent the flame passage into cargo tank in compliance with IMO MSC/Circ. 677/1009, ISO 15364 and vapor control system of USCG ( 46 CFR.39-20.11 & 162.017 )
Basic Rule Requirements
IMO MSC/Circ.1009 International Standard 15364 ...
TANKTECH -Tank Cleaning Machine
CLEANMAX UPM series is a Tank Cleaning Machines which can be completely programmable machine with single nozzle and can be installed on the tank top or deck. It is suitable for cleaning cargo and slop tanks for Crude oil and Product/Chemical tankers as well as Bulk carriers
TANKTECH- Emergency towing arrangement
An emergency towing arrangement shall be fitted at both ends onboard all tankers of not less than 20,000 tones deadweight as defined in regulation 1/3.21 constructed on or after 1 January 1996.
Benefits
- Saving deck area for installation - Saving Man-hour for installation - Reduction of reinforce structure for under deck - Easy Arrangement for AFT. mooring system
TANKTECH- Anti Heeling System
Anti heeling system is designed to automatically balance the vessel in upright position by pumping ballast water of ballast tank during loading and unloading. The main components of system are main control panel including inclinometer, pump starter panel, reversible propeller pump and pneumatic actuator valve.
