- POLYSPEC Marine Decking Products
- PolySpec -Marine Decking Products
PolySpec provides the most comprehensive line of polymeric interior and exterior deck coverings available for ships and offshore drilling platforms. These decorative and functional systems are easy to install and provide longer service life than tile, carpet or vinyl sheet products. They require no waxing or stripping, are fire retardant and offer good wear properties and chemical resistance.
[Details]
- AST NON-SKID COATING
- AST NON-SKID COATING
American Safety Technologies has been the leading manufacturer of non-skid coatings and interior polymeric decking systems for over 94 years. Our non-skid coating are applied to all interior and exterior decks and our wide selection of ST-100 terrazzo, color flake systems, and underlayments applied in most areas on board including galleys, living quarters, wet spaces and can be found on almost every Navy vessel at home and abroad. Our AST non-skid coatings are famous for their incredible toughness and durability. Originally engineered for use on the flight deck of U.S. Navy aircraft carriers, our coatings are tested to withstand over 15,000 high-impact jet landings per year.
[Details]
- ECDIS
- TRANSAS-ECDIS
During the last two decades there has been a constant flow of new carriage requirements for Bridge equipment; in most cases giving a burden for ship owners and crew. ECDIS can reverse this situation if it’s properly installed, optimized for a particular vessel and manned by a well-trained crew.
It can bring added value to a shipowner as well as for a crew, in addition to enhanced safety fulfilling the ECDIS Carriage Requirement.
We all know what ECDIS stands for: Electronic Chart Display and Information System. But it can be much more: 1) Efficient route and voyage planning 2) Chart management and digital publications 3) Display of information 4) Integration 5) Savings
[Details]
- TANKTECH High Velocity Pressure/Vacuum Valve
- TANKTECH -High Velocity Pressure/Vacuum Valve
U-ISO-H/V/G series high velocity pressure/vacuum valve is designed to prevent the flame passage into cargo tanks and to relieve excessive over pressure or under vacuum of cargo tanks during cargo loading, discharging, ballasting and thermal variation. U-ISO-H/V/G series of high velocity pressure/vacuum valve, which provide Non-hammering, Non-accumulation condensate vapor and Non-corrosion for marine cargo tanks, are very simple and advanced models. U-ISO-H/V/G series is designed to prevent the flame passage into cargo tank in compliance with IMO MSC/Circ. 677/1009, ISO 15364 and vapor control system of USCG ( 46 CFR.39-20.11 & 162.017 )
Basic Rule Requirements
IMO MSC/Circ.1009 International Standard 15364 ...
[Details]
- TANKTECH Tank Cleaning Machine
- TANKTECH -Tank Cleaning Machine
CLEANMAX UPM series is a Tank Cleaning Machines which can be completely programmable machine with single nozzle and can be installed on the tank top or deck. It is suitable for cleaning cargo and slop tanks for Crude oil and Product/Chemical tankers as well as Bulk carriers
[Details]
- TANKTECH Emergency towing arrangement
- TANKTECH- Emergency towing arrangement
An emergency towing arrangement shall be fitted at both ends onboard all tankers of not less than 20,000 tones deadweight as defined in regulation 1/3.21 constructed on or after 1 January 1996.
Benefits
- Saving deck area for installation - Saving Man-hour for installation - Reduction of reinforce structure for under deck - Easy Arrangement for AFT. mooring system
[Details]
- TANKTECH Anti Heeling System
- TANKTECH- Anti Heeling System
Anti heeling system is designed to automatically balance the vessel in upright position by pumping ballast water of ballast tank during loading and unloading. The main components of system are main control panel including inclinometer, pump starter panel, reversible propeller pump and pneumatic actuator valve.
[Details]
|